Error Code CE (Hall)
The washer lost track of the clutch position during operation
Moderate
Address soon - your appliance may not work properly
Also displayed as: CE
What This Means
Clutch hall sensor signal malfunction; Clutch hall sensor connector loose or disconnected; Clutch motor fault; Main PBA fault
What actually causes this:
The clutch position sensor signal was lost while the washer was running
First Thing to Check
Unplug the washer, wait 60 seconds, and plug it back in — if the error returns, it needs service
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connector connections
- 2
2. Check the clutch hall signal at the connector when power is on
- 3
3. If clutch hall signal is abnormal, replace the clutch assembly
- 4
4. If clutch tests normal, replace Main PBA
Other Error Codes for WA50F9A8DSP
The washer cannot detect how much water is in the tub
The washer's motor cannot spin or is detecting a problem
The washer is not getting enough water to fill
The washer cannot pump the water out
The washer's control boards cannot communicate with each other
A button on the control panel appears to be stuck
The washer does not detect the door as properly closed
The washer cannot unlock the door after a cycle